Eibach Prokit Spring Set For Abarth & Fiat 500
SKU:
£199.95
£134.95
£134.95
On Sale
per item
Transform the ride height and feel of your Abarth or Fiat 500 with this set of 4 springs specially developed for the Abarth
This Eibach PROKIT lowers the car by 30mm with an overall improvement in the handling characteristics. The kit is fully TUV approved and is supplied complete with the required certificate.
MS-Racing Rear Chassis Bar
£129.95
Specifically designed to reduce the movements of the frame, this rear strut mount bar is able to transmit, contain and distribute the forces generated on the frame increasing the rigidity. This is also required if you are going for the full "Biposto" interior look with net. Available in red or black.
Please Note;To mount this product it is necessary to remove the rear seats.
Front Strut Bar Kit Abarth 500
£167.95
Designed to improve chassis rigidity by tying the two strut towers together and with the main chassis, it transmits the load of each strut tower during cornering, tying the two towers together and reducing chassis deformation. The results are a better handling, a more precise steering system and a better suspension characteristic angle control.
Material; Carbon steel Fe36 MIG welded.
Finish; Powder coated epoxy heavy duty paint in metallic grey.
Weight; 2.50kg.
Material; Carbon steel Fe36 MIG welded.
Finish; Powder coated epoxy heavy duty paint in metallic grey.
Weight; 2.50kg.
Front Subframe Lateral Tie Rod Kit Abarth 500
£140.95
These tie rods are a useful reinforcement to the front structure of the chassis , joining the suspension subframe to main frame member .
In order to get a better reinforcement we have developed a tie rod kit taking inspiration from the American model which has this as standard however not as rigid as it could be
The main advantage which makes our tie rods stand out from all our American competitors is that we developed them without bending, the result is greater stiffness.
If you want to dramatically change the front end stiffness and handling of your Abarth 500 then these are the ultimate upgrade for you.
Material; Carbon steel Fe36 MIG welded
Finish; Powder coated epoxy heavy duty paint in metallic grey
Weight; 252 grams per rod
In order to get a better reinforcement we have developed a tie rod kit taking inspiration from the American model which has this as standard however not as rigid as it could be
The main advantage which makes our tie rods stand out from all our American competitors is that we developed them without bending, the result is greater stiffness.
If you want to dramatically change the front end stiffness and handling of your Abarth 500 then these are the ultimate upgrade for you.
Material; Carbon steel Fe36 MIG welded
Finish; Powder coated epoxy heavy duty paint in metallic grey
Weight; 252 grams per rod
